Taconic commits to supplying best-in-class materials. They will ensure the success of your next board design. To optimize your design, review the general processing guidelines for NF-30L. They have lower costs and ease of processing in high-volume automated manufacturing equipment.
NF-30L is a high-purity FR4 material. It has a high dielectric constant (k) of 3.1 and good resistance to excessive moisture and oxide. Its higher conductivity also lowers the board manufacturing cost. We reduce the number of plated through holes (HT), reducing the final unit cost. In addition, NF-30L conducts electricity between the metallization and the traces. These characteristics reduce the likelihood of shorts and opening during board validation.
NF-30L has a plated metal finish that is resistant to moisture and oxidization. The resistance to oxidation and moisture helps to reduce solder mask breakdown. However, it can compromise adhesion between the metal and your board.
Features
1. RoHS Compliant
NF-30L is RoHS compliant. It meets the specifications of the European Union’s Restriction of Hazardous Substances directive. It does not contain any restricted substances. Taconic encourages you to use safer materials for your next board design. Low Hazardous Substances NF-30L has a low greatest density of 1%. So, it meets the European Union’s Restriction of Hazardous Substances directive (RoHS). That directive came to play in 2003 to replace the more complex and hazardous RoHS. RoHS aims to reduce the use of hazardous substances in consumer products.
2. High Surface-Area
NF-30L has a higher surface area than most other plastic materials. This key feature of the material enables excellent etch and dry shave performance. It also yields significant savings in board manufacturing costs. You do this by reducing the number of plated through holes (HT).
3. Good Conductivity
NF-30L is a better conductor than most other plastic materials. It has an electrical conductivity of over 1000 S/m. This improves board manufacturing costs. So, it does this by lowering the number of plated through holes (HT) and reducing the solder required.
4. Excellent Solderability & Connectivity
NF-30L has high thermal conductivity. It is an excellent solderable material with excellent wetting properties. This means we can solder it. It allows for solder mask and stencil functionality without an interlayer dielectric. In turn, it improves thermal performance.
NF-30L is available in 50 kg and 100 kg nominal containers. Additionally, it has a 90% metal finish and a dielectric constant of 3.1.
5. Low-Temperature Processing
NF-30L does not have the typical low-temperature processing requirements for metal trace plating. Therefore, we often process it at room temperature. This allows NF-30L to be more cost-effective. It lowers material costs per metallization level. It also reduces heat-related onsite environmental contamination risks.
6. Heat Resistance
NF-30L has high thermal and electrical conductivity. Its high dielectric constant enables it to maintain consistent performance. It happens when exposed to heat. So, we can process NF-30L at temperatures as low as 50 degrees Celsius. It reduces material costs and onsite processing time. The feature is especially beneficial in processing tools. Such is a situation where immersion coolants achieve lower temperatures rather than air cooling.
7. Acid Resistance
NF-30L has excellent corrosion resistance to acids, such as phosphoric and hydrofluoric acid. This property ensures a lack of corrosion in the electronics industry. It is due to companies’ use of films on printed circuit boards. These companies manufacture semiconductors, microprocessors, memory, and other electronic products.
8. Thickness & Weight Reduction
NF-30L is one of the thinnest FR4 materials available. Its thicknesses are down to 0.1 mm while maintaining good strength and high resistivity. This feature is beneficial to companies that use automated PCB manufacturing equipment. It makes NF-30L compatible with most automated synthesis systems.
9. Environmentally Friendly
NF-30L is a used environmentally friendly material. It has a low environmental impact. We can manufacture it without using dangerous metal. They include metal alloys, polymers, solvents, or other toxic chemicals. NF-30L features an average density of 0.91 and a maximum density of 1%, which is much lower than other materials.
10. Cost-Effective
NF-30L features a high dielectric constant (k) and low thermal expansion coefficient. It can save you valuable time, labor, energy, and costs for your product. As a result, these lower costs may enable you to develop new products. It helps to meet the demands of particular markets or end-users.
Materials
Taconic has two product lines. One for surface mount and one for through-hole metallization. Taconic’s plastics are available in both extruded and injection molded formats.
Taconic has been developing several new materials since its foundation in 1960. RayMing PCB and Assembly are designing these materials to meet the demands of new markets. They also use it for new applications and technologies. These include:
1. UL94-HB:
It is a polymer material resistant to abrasion, impact, and chemicals. It has a large tensile strength (18 MPa) and exceptional chemical resistance. UL94-HB has a dielectric constant of 3.5 at 300 °C.
2. LLDPE:
This high-performance polyethylene is linear low-density polyethylene (LLDPE). LLDPE has high surge performance, good impact resistance, and good heat sealability. It also retains flexibility after heat treatment and aging.
3. ETFE:
This material has high chemical resistance and excellent electrical, mechanical, and thermal properties. This product is best suited for semiconductor electronics, LED displays, and semiconductor packaging.
4. Acrylic:
We mold or extrude a family of transparent plastics with good impact strength. They also have a high light transmission combined with low processing costs. Acrylic meets the demand for acrylic sheets (PC sheets). We use it in automotive applications and protective films for various devices. They include LCDs, inkjet printers, and other devices.
5. UL94-VO:
This material replaces PVC due to its superior fire-retardant properties and lower emissions. It also has a low density and excellent thermal conductivity. UL94-VO meets the European and North American environmental standards for electronic applications.
6. Cross-Linked Polyolefin (XLPO):
It is nylon-like material with high physical strength, dimensional stability, and dielectric properties. It is suitable for a wide range of applications. They range from wire & cable insulation to hoses and harnesses. XLPO has a high heat distortion temperature (140 °C), and aging, light, and temperature does not affect it.
How to handle Taconic NF-30L PCB
The processing temperature of Taconic NF-30L PCB is generally lower than other materials. So, it can be mass-transferred during the process, and the temperature is not high. Do not press hard on the product to avoid damaging the components. Instead, put it down on a flat surface to transfer or pick up. Taconic NF30L is a high-performance resin. It poses no human health risk when handled following good industrial hygiene practices. You should follow applicable governmental regulations. However, Taconic NF-30L can generate high levels of dust. They mostly come during cutting, milling, drilling, or sanding.
Prevent contaminant deposits on the material or copper:
- Do not handle Taconic NF-30L PCB during the cutting, milling, or drilling operation.
- If a contaminant deposit forms on Taconic NF-30L PCB during ordinary use, start by wiping it away with a clean cloth. Then wear proper personal protective equipment. Finally, disinfect the area with appropriate chemical or mechanical means.
- Avoid processing Taconic NF-30L PCB while wearing clothing with dark or non-white colors.
- Avoid contaminating Taconic NF-30L PCB by touching other items or materials. Also, be sure to avoid those made from a different material.
- When processing Taconic NF-30L PCB, use a vacuum cleaner to clean up dust and contaminate. It is dust that may become airborne in application. Also, ensure sanitization during transportation, storage, and handling operations.
Do not stack panels on top of each other:
- Avoid stacking Taconic NF-30L PCB on top of each other for storage or transportation.
- Use a wooden pallet board or similar device to stabilize. Protect Taconic NF-30L PCB during handling, stack, and storage.
Do not expose to heat:
- We use Taconic NF-30L PCB in the semiconductor industry. It requires operating temperatures well above room temperature.
Do not pick up a panel by one edge:
- To avoid damage to the PCB, do not pick up a panel by one edge.
- Instead, use a clean cloth to pick up the panel and carry it to the work area for processing.
Avoid mechanical scrubbing:
- Do not use a scrubbing brush or sharp instrument to clean Taconic NF-30L PCB.
- Avoid mechanical scrubbing of Taconic NF-30L PCB, damaging its surface.
- Scrub the PCB using soft cloths and warm water, or use soapy water to wash it.
- Dry the panel’s surface completely before processing it or re-use it in other work areas.
Applications of Taconic NF-30L PCB
Taconic materials are helpful in various industrial applications. Some examples include consumer electronics, automotive, and Telecom. We also use them in the semiconductor manufacturing industry. They assemble liquid crystal displays. We often use them as repair materials or parts of machines or equipment that need special care.
Aerospace Components:
The aerospace industry uses PCBs made with Taconic’s high-performance materials. They are famous for their excellent electrical and mechanical properties. Taconic’s PCB materials are valuable for the electronics industry. They are helpful in several avionic applications. They include plane navigation systems, control systems, and flight deck instruments.
Toxicological Testing:
Taconic’s end-user toxicity testing program utilizes several PCBs and related chemicals produced. Manufacturers design the testing to meet international standards.
Edible Food Packaging:
Taconic is an OEM supplier to companies. It produces packaging for food products such as fruit juices and sports drinks. Taconic also supplies trays, pots, blister packs, and other packaging for food products.
Automotive Radar Sensors:
One of Taconic’s known customers manufactures automotive radar sensors. They integrate Taconic’s plastic materials into the product. The application is helpful in automobiles to detect impending collisions. It is one of the first applications of this type of technology.
Conclusion
NF-30L is a high-purity FR4 material. It has a high dielectric constant (k) of 3.1 and good resistance to excessive moisture and oxide. Its higher conductivity also lowers the board manufacturing cost. It does this by reducing the number of plated through holes (HT). This reduces the final cost per unit or other materials available at Taconic.
