Find a PCB Clone company and Supplier. Choose Quality pcb clone company , Suppliers, Exporters at RayPCB.com.
You have a physical electronic circuit board on-hand but do not have the circuit design files ?
You donot have any PCB Gerber drwaings files for your PCB production and circuit assembly .
You want to reprdocue the circuit board(PCB), But your donot have the blueprint,Or the blueprint is missing.
Send Us a photo of your electronic circuit board that you want to copy, We can assess the PCB Copying for you.
When We get the photos we can give rough quotation to you , after we get the sample we can give exact quote for you
PCB Cloning Service
PCB cloning service enables you to replicate the same copy of electornic circuit board that you want. For a simple electronic circuit, Copying the PCB circuit board is not too difficult, If the circuit involces intelligent controller , cloning should be the last resort that you should opt for as a solution for your engineering or business challenge.
How to Work for Cloning a PCB ?
1. Take sample photos, send to sales@raypcb.com ,
2.Our engineer will give rough price, if have the program pls tell us or take clear photos of ICs
3.Price Ok, Send sample to us (prefer 2 sample if have ) , after get the sample , we will give exact quotation to you ( some ICs have program need crack ,we will separate to quote )
4. Payment , Then start to copy
5. finish copy , we will send Gerber files , schematic diagram, Bom List ( if have )
So now , Copy job is completed , then we will start to manufacturing the board for you .
PCBs are an integral component of most electronic devices. These circuit boards play a significant role in the electronic industry. The recent development in the production of electronic devices has increased PCB production. To meet the increasing demands of electronic designers, there is the fabrication of a new set of PCBs.
This consistent development may cause inefficiency and waste, this where PCB clone service comes in. PCB cloning is very important for certain reasons. The need to replace an outdated PCB that is no longer in production is one of the most important reasons for a PCB cloning service.
One major problem the industry faces is how to replace old-fashioned PCBs that are used in high-frequency applications. To understand PCB clone service, it is important to know what PCB clone is, its benefits, and how it works.
What is PCB Clone?
PCB clone is also referred to as PCB duplication or PCB copy. PCB clone is a reversely researching technology that makes use of existing PCB boards and makes a duplicate of it. It is an aspect of PCB reverse engineering.
Reverse engineering is applicable in hardware engineering. It plays a vital role in human DNA mapping and the development of computer software. When cloning a PCB, you duplicate the exact design of the circuit board. The major aim of PCB clones is to copy and replace obsolete PCBs.
In PCB cloning, there are two major things that need to be done; making the Bill of Material (BOM) and copying the schematics. A PCB clone board utilizes several research techniques to get a PCB design circuit for a great excellent electronic device. It also uses a BOM and a circuit schematic.
The concept of PCB clone is rarely understood. The development of electronic devices keeps changing every day, and several electronics get an upgrade at least once a year. Many engineers have realized that using R&D approaches won’t meet the advancement of electronic product replacement. Due to this, reverse engineering has become a fast approach to adopt in the industry.
PCB clone is a cost-effective option to re-design a board. It helps to extend the lifespan of devices and systems when parts become outdated. The amazing thing about PCB clones is that you can copy the existing design based on your requirements.
What is a PCB Clone Service?
PCB clone service allows you to make a replica of the exact copy of the electronic circuit board. PCB copy isn’t a difficult thing to do. If the right circuit features a good controller, cloning should be the last solution to consider.
PCB clone service helps you to produce more printed circuit boards without the need to design them from scratch. Today’s electronics depend on PCB clone services. More electronics producers are considering PCB copy as a cost-effective alternative.
Advantages of PCB Clone
Since we now understand how PCB clones work, it is important to know its advantages. PCB clones have several advantages and we discuss them below.
Economical and Cost-effective Option
The production process of PCB boards takes a long time. It is a hard task that requires manufacturing high-quality boards. This is a big challenge for PCB manufacturers. PCB manufacturing also can also be expensive depending on what you want to use it for.
The cost of designing PCB boards from the beginning is much more expensive than making a copy of them. It includes the cost of developing the prototypes and examining them. You will also incur cost to adjust the design parameters and optimize the design.
PCB clone is a better option that can help to reduce these costs. This makes the PCB production process cost-effective. For example, if you opt for a PCB copy, you won’t need to spend any cost on a design. It has also been proved that products from reverse engineering are much better than the ones from conventional manufacturing.
Streamline Production
PCB clone helps manufacturers to fabricate PCB boards with less effort. This reverse engineering technology helps to determine some good designs. Manufacturers can combine these designs and start manufacturing the PCBs on the new design.
This method helps to automate the production processes and then streamline the production operations. Automation and streamlining will help to minimize manual labor. This will reduce labor costs.
Streamlining the production processes can also help to produce high-performance and durable boards; hence improving the products’ quality.
Conscientious engineering technique
When we talk about conscientiousness, we mean paying attention to detail while designing a board. When manufacturers depend heavily on PCB clones then they have to carry out a thorough analysis of the board in question. This enables engineers to fabricate products of high grade.
This technique also allows engineers to design PCBs which are reliable and stable in varying temperatures. PCB clone allows the engineer to design a product that meets the requirements of users. The reverse engineering limits the engineer to the existing PCB design. This makes the engineer improve the product’s performance.
Improved scalability and freedom
One of the benefits of PCB clones is that it enables producers to gain a good degree of freedom. It allows them to be more flexible in the production process. Therefore, the resultant printed circuit boards are customized and modified according to users’ needs.
PCB clone allows manufacturers to fabricate many boards from the existing PCB design. Therefore they can design a large number of PCB board clones. They can also improve our production operations according to your demands. This helps producers to generate more income.
This reverse engineering also helps manufacturers to align their production operations with the existing designs of users. Therefore users can state their market needs and make orders. PCB clone is a win-win for both the manufacturer and the user.
Consistent performance
When manufacturers use PCB copy for producing many PCB boards then they will achieve the same design. Without a doubt, these boards will offer exact performance under similar conditions. PC clone helps to ensure that these boards are fabricated with the attention to detail. Therefore, their performance is better than PCB boards produced via more conventional routes.
PCB clone helps the manufacturer to design boards that offer improved performance. Most of these boards are used in high-speed applications due to their unique electrical and mechanical qualities.
How to Copy a Printed Circuit Board
These days, there are several companies that specialize in copying complex PCBs. You can copy simple circuit boards yourself. Some pieces of equipment are needed for PCB copying. You will need computers, AUTOCAD, scanners, and PORTEL99.
- Place the board you need to duplicate in the scanner and use the scanner, ensure you adjust the contrast and brightness of your scanner
- Use the AUTOCAD software and make a file, from the insert menu, choose the raster image. Choose the image you want to use, and then the insert image box will pop up.
- After inserting the image, draw a frame to protect the PCB border. You must use the object lock point when you draw the border.
- Draw the component package and the shape. Count the number of packages used on the board when drawing the component package. Each package has to draw one and it will be transferred to the PORTEL 99 for processing.
- Make a new PCB file after opening PORTEL99 and select import CAD file in the PROTEL 99 PCB editor’s menu. Put the CAD file in it. After importing it, you will see the graph of the component packaging in PORTEL99 editor.
- Create another PCB component editor. After this, choose a component from the PORTEL99 editor and insert a copy to the component editor
- When you are through with the component packages, put them in PROTEL 99 editor and transfer them to a CAD file
- Open the CAD file and also open the CAD file you imported into the PCB image. After this, copy the component package to the CAD with the PCB image.
- Put the vias and pads. You have to measure the outer and inner sizes of the pads in the CAD. Determine the outer and inner dimensions of the ring. Ensure you place the pad according to their sizes when you are placing them. You can’t place the polygon pad and the square pad, but you can utilize the method of filling.
- Draw the trace by using the aggregate line. Choose the aggregate line from the drawing menu and start drawing.
- Put the silkscreen. If the silkscreen is irregular, utilize the polymer line.
PCB copy requires extreme attention and care to be done appropriately. PCB duplication is carried out by an experienced PCB clone service. There are vital steps to be carried out to copy a PCB board and each of these steps must be carried out carefully.
Conclusion
In today’s world, the electronic industry is experiencing advancement. The electronic industry is a different kind of industry where innovations occur more often. The need for PCB clones can never be underestimated. Electronic producers always want to change the designs of their PCB once there is an innovation in the market.
